Mixed example

Mixed garden irrigation: lawn + flower beds + Mediterranean plants

Three plant types, three irrigation systems, three separate valves. How to manage different pressures, the drip pressure regulator, and why Mediterranean plants should never be watered with pop-ups.

Open this garden in the editor →

Includes the lawn and its sprinklers. A free account is required: the garden is copied to your account, where you can change it.

The mixed garden problem

Most residential gardens have at least two types of areas with very different water needs. The lawn is the thirstiest zone: it needs 3–5 waterings per week in summer. Ornamental shrubs need 2–3, Mediterranean plants 1 or fewer.

The main technical problem is that pop-ups and drip lines run at incompatible pressures. A common mistake is installing them on the same circuit, causing both to malfunction.

Description of the typical garden

  • Central lawn: 8 m × 6 m = 48 m² (full sun)
  • Shrub bed on the west perimeter: 7 m × 1.5 m = 10.5 m² (partial shade)
  • Mediterranean corner to the south-east: 3 m × 2.5 m = 7.5 m² (full sun, sandy soil)
  • Water connection: north side, dynamic pressure 2.4 bar, 16 L/min

3-zone layout with different systems

Zone 1: Lawn (rotating pop-ups)

Hunter MP1000 rotary nozzles on pop-up bodies, with a 3.7 m radius at 2.1 bar at the sprinklers (manufacturer’s table). Layout: 2 sprinklers at 90° at the north corners, 2 sprinklers at 90° at the south corners, 2 sprinklers at 180° at the center of the long sides. Along the 8 m sides the sprinklers are 4 m apart, just beyond the radius; across the 6 m width they are 6 m apart, so head-to-head is not met there and the jets only partly overlap. Total flow: 4 × 0.64 L/min (90°) + 2 × 1.29 L/min (180°) = 5.1 L/min.

Zone 1 in the app: 8 × 6 m lawn (48 m²), 6 sprinklers with a 3.7 m radius at 2.1 bar, English lawn in full sun: 5.0 mm/day needed, 44.3 m² covered (92.2%). The app estimates 4.2 L/min, the manufacturer’s table gives 5.1 L/min
Zone 1 in the app: 8 × 6 m lawn (48 m²), 6 sprinklers with a 3.7 m radius at 2.1 bar, English lawn in full sun: 5.0 mm/day needed, 44.3 m² covered (92.2%). The app estimates 4.2 L/min, the manufacturer’s table gives 5.1 L/min

Zone 2: Shrub bed (drip)

16 mm PE drip line around the bed perimeter (14 m). Self-compensating drippers at 4 L/h every 60 cm: 23 drippers total. Total flow: 92 L/h = 1.5 L/min. 1 bar pressure regulator upstream of the line.

Frequency: Tuesday and Friday at 6:30 AM, 40 minutes.

Zone 2 in the app: 7 × 1.5 m bed (10.5 m²), shrubs in partial shade: 2.4 mm/day needed. The drawing has no sprinklers: this zone runs on drip, and the app does not draw drip lines
Zone 2 in the app: 7 × 1.5 m bed (10.5 m²), shrubs in partial shade: 2.4 mm/day needed. The drawing has no sprinklers: this zone runs on drip, and the app does not draw drip lines

Zone 3: Mediterranean (micro-drip)

Micro-drippers at 1 L/h placed at the base of each plant. 12 plants = 12 drippers. Flow: 12 L/h = 0.2 L/min.

Frequency: a single 30-minute weekly watering in July and August. Often no watering from September to May.

Zone 3 in the app: 3 × 2.5 m corner (7.5 m²), sandy soil in full sun. The app has no Mediterranean plant category: the closest one, Shrubs, gives 3.0 mm/day, an upper limit because established Mediterranean plants use less
Zone 3 in the app: 3 × 2.5 m corner (7.5 m²), sandy soil in full sun. The app has no Mediterranean plant category: the closest one, Shrubs, gives 3.0 mm/day, an upper limit because established Mediterranean plants use less

Caution: this zone can never share a circuit with Zone 1 (pressures too different) or Zone 2 (Mediterranean plants need far fewer waterings).

Why the circuits must be separate

FeatureZone 1 (pop-up)Zone 2 (shrub drip)Zone 3 (micro-drip)
Operating pressure2.1–3.8 bar0.5–1.5 bar0.5–1.5 bar
Zone flow5.1 L/min1.5 L/min0.2 L/min
Summer frequency4–5×/week2–3×/week1×/week
Wetting typeOverhead across the whole areaAt the rootAt the root
Pressure regulatorNoYes (1 bar)Yes (0.8 bar)

Combining Zone 1 and Zone 2 would cause either over-pressurized pop-ups, or drippers at the right pressure but under-performing pop-ups. There is no intermediate pressure that satisfies both.

Generate the project for your garden

These examples show typical scenarios. Use SprinklerMap to calculate a precise layout, pressures and materials list for your real situation.

Open SprinklerMap for free →