Practical guides and technical insights to design, install and maintain an efficient irrigation system for your garden.
How Much Lawn Can Your Water Support? A Calculator for Wells, Cisterns and Rain Tanks
Start from your well, cistern or rain tank and find the square footage of lawn, shrubs or hedges you can keep alive through the hottest week of summer.
Read article →How to Get Your Sprinkler System Design Reviewed Before You Buy Parts
Supply shops, r/Irrigation and installers: what a reviewer needs (PSI, GPM, a scaled plan), the mistakes they catch fast, how to hire a pro without spam.
Read article →Smart sprinkler controller without internet: what Rachio, Wyze, Hydrawise and Rain Bird do offline
Internet down, Wi-Fi off, cloud outage or power cut: what Rachio, Wyze, Hydrawise, Rain Bird and OpenSprinkler document, plus the WaterSense rules behind it.
Read article →Less water, fewer weeds? What an Oregon tall fescue experiment measured
An Oregon study compares irrigation amounts and frequency in tall fescue. Understand lawn color, annual bluegrass results and the limits before changing your schedule.
Read article →Watering new grass seed: how many minutes per zone
How long to water new grass seed depends on the nozzles you own, not on the calendar: the formula, a run-time table for spray heads and rotors, and the schedule phase by phase.
Read article →Sprinkler Head Spacing: The One Decision That Decides Whether Your Lawn Goes Brown
How far apart should sprinkler heads be? Use the radius at your measured pressure, compare square and triangular layouts, and check head-to-head coverage before digging.
Read article →How to Draw a Sprinkler Plan Before You Break Ground
Building a plan that holds together: scale drawing of the yard, zones grouped by planting type, tracing the pipe network, and getting the work sequence right before the first trench opens.
Read article →Irrigation Pump: How to Tell If You Actually Need One (and How to Size It)
Low pressure and low flow are two different faults with opposite fixes, and buying a booster pump for a flow problem is how pumps burn out. How to diagnose which one you have, what to try first, and how to read a pump curve.
Read article →Can an Algorithm Prevent Runoff Better Than a Smart Controller? The WaRPIC Paper Tested It in the Field
WaRPIC (Texas A&M, BuildSys 2019) uses a machine learning model trained with the homeowner's help to predict the maximum irrigation runtime before runoff: in testing it wasted only 2.6% of the water lost by a commercial smart controller.
Read article →Why Evapotranspiration Is the Foundation of Modern Irrigation: the FAO-56 Paper Explained
What FAO Paper 56 (Allen et al., 1998) says, why Penman-Monteith became the standard for a garden's water needs, and what it means in practice.
Read article →How Reliable Is the FAO-56 Method? The Original Authors Answer, 17 Years Later
In 2015 the original FAO-56 authors published a review 17 years on: what held up against later research, what didn't, and why the gap between standard and actual crop coefficients explains part of the criticism of the method.
Read article →Robot Lawn Mowers: How to Choose One, Split the Lawn into Zones and Live with a Sprinkler System
Wire, satellite or grass sensor, slope inside the lawn versus at the edge, the zone math, pop-up heads and buried pipe, blades and winter storage: what to check before putting a robot mower on an irrigated lawn.
Read article →TPC Sawgrass Hole 17: What Grows on the Island Green and What It Teaches About Lawn Water
Bermudagrass all year and ryegrass for winter: how the Stadium Course swaps turf to peak for THE PLAYERS Championship 2027 (March 11-14), and what the same trade-off means for watering a home lawn.
Read article →The 2026 World Cup final pitch: what was under the grass and what it teaches about watering a lawn
The 2026 World Cup final was played on real Bermudagrass laid over sand with automatic irrigation. Which grass it was, how much water it needs compared with a cool-season lawn, and what is worth copying at home.
Read article →How to fix a bare patch in the lawn (including the pre-germinated seed method)
Repair a bare spot in the lawn: find out why grass will not grow there, prepare the soil, sow dry or with pre-germinated seed, and keep the patch moist without flooding the rest of the sprinkler zone.
Read article →What grass does Wimbledon use, and how do they water it?
100% perennial ryegrass, an 8 mm cut and a separate irrigation program for every court: how the All England Club decides how much water its grass gets, and what you can borrow for your own lawn.
Read article →7 Best Free Irrigation Design Software Tools (2026)
Compare 7 irrigation planners: automatic head placement, satellite maps, parts lists and account requirements. See which tool fits your yard and where each falls short.
Read article →When to Water Your Garden in a Heatwave: Timing, Amounts and Mistakes to Avoid
The right time of day to water during a heatwave, how many liters (or gallons) your lawn, beds and hedges need, and the 5 mistakes that scorch a garden in summer heat.
Read article →Automatic Watering While You’re on Holiday: How to Keep Plants and Lawn Alive
A pre-departure checklist, how long a holiday drip kit lasts (with the math), how to adjust an existing timer, and what to do if your WiFi controller loses connection while you’re away.
Read article →Vegetation Types in SprinklerMap: How ET Values Drive Your Watering Schedule
How SprinklerMap uses a fixed peak-summer water need (ET, in mm/day) for each grass type, shrubs and lawn alternatives, scaled by sun exposure, to calculate irrigation run times.
Read article →Irrigation Design Mistakes: A Pre-Installation Checklist to Avoid Dry Spots and Soggy Zones
A practical checklist of the 7 most common irrigation design mistakes, covering pressure, flow, zoning, pipe sizing, and valve placement, before you dig.
Read article →Choosing lawn seed by sun, water and wear: species, labels and mixes
How to pick a lawn seed mix from the species on the label: how much water each grass needs at peak summer, which mixes suit sun, shade and wear, and how to water the seed until it comes up.
Read article →Rain sensor for irrigation: legal requirement and how it works
How rain sensors work on an automatic irrigation system, where to mount them, how to wire them to the controller, and where they are required by law.
Read article →Sprinkler valves explained: anti-siphon or inline, how they work, how to wire them, and how to fix the common faults
The zone valve is the part that turns a controller signal into water. Anti-siphon versus inline valves and what each means for backflow, how a pilot-operated diaphragm valve works, 24V AC wiring with one common, wire gauge for burial, and the fixes for a valve that will not open or will not close.
Read article →Pressure reducer for irrigation: when you need one and how to install it
How to detect excess pressure, which reducer to choose, and where to install it to protect nozzles and valves.
Read article →Slope garden irrigation: designing a system without run-off
How to irrigate a sloped garden: check-valve heads, cycle and soak, horizontal zone layout and rotor nozzle selection.
Read article →Drip irrigation for hedges and shrubs: design and installation
How to put a hedge or shrub bed on drip: pressure-compensating emitters in GPH, dripline vs point emitters, a drip zone kit with filter and 25-30 PSI regulator, run length limits and how long to water.
Read article →Smart sprinkler automations: rain delay, soil moisture and freeze skip that actually work
How to automate a sprinkler schedule so it skips rain, wet soil, freezing mornings and wind, and still follows your city's watering days. Rachio, B-hyve, Tuya Smart Life and Home Assistant setups, in inches and °F.
Read article →Smart garden: how to design an intelligent irrigation system
Complete guide to building a smart irrigation system: WiFi controllers, smart valves, rain sensors and soil moisture sensors. Zigbee and WiFi protocols, Tuya and Home Assistant integration.
Read article →How a sprinkler is built: anatomy and internal components
Discover every component inside a popup sprinkler: body, stem, nozzle, check valve and filter. Guide to disassembly, part replacement and seasonal maintenance.
Read article →How to map irrigation zones in your garden
Step-by-step guide to dividing your garden into irrigation zones: how to measure areas, choose the right sprinkler type for each zone and create the final map.
Read article →Water pressure for irrigation: ideal values and zone calculation
Work out how many sprinkler heads fit in a zone using measured flow and operating pressure. Includes pressure losses, nozzle flow rates and a worked garden example.
Read article →Sprinkler pipe and fittings: PVC vs poly, Schedule 40 vs Class 200, and what size you need
Which pipe to use for a home sprinkler system in the US: PVC Schedule 40 or Class 200 for mains and laterals, poly pipe in cold climates, swing joints at the heads. With a friction loss chart in PSI per 100 ft, the 5 ft/s velocity rule, and the fittings that do not leak.
Read article →Smart sprinkler controllers: what WaterSense and Wi-Fi save, rebates, and when the upgrade pays
What a Wi-Fi sprinkler controller does that a clock timer with a rain sensor does not, what WaterSense labeling means, how utility rebates change the math, and the payback in years for a typical US lawn. Plus installation, Wi-Fi range, and what happens when the cloud goes down.
Read article →Irrigation controllers and timers: how to choose the right model
The controller is the heart of every automatic irrigation system. A complete guide to choosing between battery timers and 230V controllers, single-zone and multi-zone, with the most reliable models.
Read article →Pop-up rotor sprinklers: complete guide to the best models
Rotor sprinklers cover radii from 5 to 15 metres and are perfect for large lawns. Discover how they work, their advantages over spray heads, and the most reliable models.
Read article →Pop-up spray sprinklers: how to choose and the best models
Pop-up spray sprinklers are the ideal solution for gardens up to 200 m². Learn how they work, when to choose them over rotors, and which models offer the best value.
Read article →How to bury irrigation pipes: depth and techniques
Practical guide to burying irrigation pipes: correct depth, which pipe to use, how to open trenches in established lawn and how to protect crossings under paths.
Read article →Drip irrigation for a vegetable garden: how much water each crop needs and how many minutes that is
Fixed rules like "a gallon per tomato" or "30 minutes a day" ignore weather and spacing. The math with FAO crop coefficients for tomatoes, peppers, squash, lettuce and more, where to find daily ET for your area, and how to turn gallons into drip run minutes, in beds, raised beds and containers.
Read article →How much does a sprinkler system cost? Parts, installer quotes, backflow, and the water bill nobody budgets
Three real lawns sized in SprinklerMap (517, 861 and 1,615 sq ft) with their full parts lists, what installer quotes usually include, the US-only line items (backflow preventer, permit, annual test), and what a summer of watering adds to your water and sewer bill.
Read article →DIY sprinkler system installation: the order of work, from permit and backflow to the final catch-cup test
How to install a sprinkler system yourself in the US, in the order that avoids digging twice: code and permit, pressure and flow, design and parts list from a scaled drawing, 811, the backflow tie-in, valves, trenching, flushing, heads, wiring, pressure test, and the first schedule.
Read article →The catch-cup test: measure sprinkler uniformity and your real inches per hour
Twenty or so identical cups tell you two things: how evenly a zone waters (DU) and how many inches per hour it really applies. How to set up the test, the Irrigation Association benchmarks for sprays and rotors, the common patterns and what fixes them, and how to turn the result into run times.
Read article →How to choose sprinkler nozzles for uniform lawns
Nozzle choice drives real distribution quality. Pick radius, arc and precipitation compatibility carefully.
Read article →How long to run sprinklers: minutes per cycle by soil and head type, with the math behind them
Sprinkler run times depend on two things most charts skip: how many inches per hour your heads put down and how fast your soil takes it in. Find your soil (hand test or the USDA Web Soil Survey), read the minutes for sand, loam and clay, and adjust for season and grass type.
Read article →New sprinkler system: the first-month tune-up, and the common problems with cause and fix
A new sprinkler system is not finished when it first runs. What to adjust in weeks one to four, from arcs and radius to run times, and a troubleshooting table: heads that will not pop up, misting, low-head drainage, zones that will not start or will not stop, and the backflow device that spits.
Read article →How to winterize a sprinkler system: drain or blow out, protect the backflow preventer, and restart in spring
When and how to winterize a sprinkler system in the US: manual or automatic drain versus a compressor blowout (no more than 50 PSI for poly, 80 PSI for PVC, 10 to 25 CFM), how to drain and protect the backflow preventer, what to do with the controller, and the spring startup that avoids cracked fittings.
Read article →Hydrozones: split your garden to irrigate better
Hydrozone planning assigns the right amount of water to each area and is one of the most effective ways to save water.
Read article →How to cut lawn irrigation water use: the gallons, the bill, and which change saves the most
How many gallons a lawn needs in summer, how that shows up on a US water and sewer bill, and the changes that cut use the most, ranked by effect and cost: zones and plant types, grass species, rain sensors, WaterSense controllers, cycle and soak, mulch, and your billing setup.
Read article →How to measure water pressure for irrigation
Learn how to measure your home water pressure for irrigation with or without a gauge, minimum values for each sprinkler type, and how to calculate pipe pressure losses.
Read article →Sprinklers or drip? How to choose zone by zone, and how to add drip to an existing sprinkler system
Lawn on pop-up sprinklers, beds, shrubs and vegetables on drip: the choice zone by zone in a table, the rules that push narrow strips to drip in some states, and the most common retrofit done wrong: adding drip to an existing sprinkler system, with valve, filter, pressure regulator and schedule.
Read article →How to design irrigation for a rectangular garden
A complete case study built in SprinklerMap: a 10×8 m garden designed step by step: survey, 4 rotors, wetting simulation, 89.5% coverage and a real parts list from €313 to €539.
Read article →