Robot Lawn Mowers: How to Choose One, Split the Lawn into Zones and Live with a Sprinkler System
Wire, satellite or grass sensor, slope inside the lawn versus at the edge, the zone math, pop-up heads and buried pipe, blades and winter storage: what to check before putting a robot mower on an irrigated lawn.
Where to start
A robot mower is chosen by looking at the yard: how much lawn there really is, how steep the worst spot gets, how many narrow passages and obstacles it has to deal with. If there is a sprinkler system under that lawn, there is one more question most buying guides skip: the mower will drive over the sprinkler heads and next to the pipe every single day.
We start with navigation, then slopes and zones, then how the mower and the irrigation system get along, and finally maintenance.
Wire, satellite or grass sensor
A boundary-wire mower works inside a cable that outlines the lawn and loops around excluded areas such as beds and trees. The wire is pegged to the surface or buried; Husqvarna manuals give a depth between 1 and 20 cm (0.4 to 8 inches). Laying it takes time, but the mower does not depend on the sky and works under heavy tree cover or between tall walls.
Wire-free mowers with RTK satellite positioning, such as Segway's Navimow range, navigate by satellite with corrections from a reference antenna; some recent models get the correction over the network and skip the antenna. You draw the boundary in the app by walking the edge and redraw it whenever the garden changes. The weak point is the signal, which degrades under dense canopy and close to tall walls. Other wire-free mowers, such as the Worx Landroid Vision models, recognize the lawn with a camera.
Then there are mowers that need no installation at all, such as the Ambrogio L60 Elite S+: a sensor tells grass from other surfaces and the mower stays on the lawn. The spec sheet gives up to 400 m² (about 4,300 sq ft) and a manually adjustable cutting height of 42 to 48 mm (1.7 to 1.9 inches). They do well where the lawn ends at a path or a curb; where it fades into a bed with no clear edge, a defined boundary causes fewer surprises.
| Type | How it finds the edge | Strength | Check before buying |
|---|---|---|---|
| Boundary wire | Cable pegged or buried (0.4-8 in) | Does not depend on satellite signal | Installation time, where the irrigation pipe runs |
| RTK satellite | Map drawn in the app | No cable, boundary easy to change | Open sky over the lawn |
| Grass sensor or camera | Recognizes where the lawn ends | No installation | Clean edges between lawn and beds |
Slope: the figure inside the lawn and the one at the edge
Husqvarna lists two slope figures for each model: the maximum inside the working area and the maximum along the boundary, where the mower has to turn and follow the wire. The second is always lower, and on a sloping yard it is often the one that decides.
To measure slope you need a straight board and a level. Rest one end on the ground at the steepest spot, hold the board level and measure the gap between the other end and the ground. Divide the gap by the board length and multiply by 100: a 9-inch gap under a 36-inch board is 25%. That is about 14 degrees; 50% is about 27 degrees. A step or a raised bed edge cannot be climbed whatever the slope rating says.
If the yard slopes, the same measurement matters for the sprinkler system, because elevation changes pressure and runoff; we cover that in Slope garden irrigation: designing a system without run-off.
| Model (Husqvarna spec sheet) | Area | Slope inside the lawn | Slope at the boundary |
|---|---|---|---|
| Automower Aspire R4 | 400 m² (about 4,300 sq ft) | 25% | 10% |
| Automower 310E NERA (wired) | 1,000 m² (about 10,800 sq ft) | 30% | 20% |
| Automower 430X NERA | 3,200 m² (about 34,400 sq ft) | 50% | 25% |
When the lawn is bigger than the mower: zones
Every model has a rated maximum area. Treat it as a guide: a lawn full of obstacles and narrow passages takes longer than an open rectangle of the same size. If your lawn is bigger than the rating, you split it into zones the mower covers in turn: zones = lawn area ÷ rated area, rounded up. A 1,000 m² lawn with a 400 m² mower gives 2.5, so 3 zones of about 333 m² each. With a wire, zones are linked by a corridor of cable; with satellite models you draw them in the app.
When you draw your yard in SprinklerMap and open the material list, the tool runs this calculation for every mower in the catalog: it ranks first the models that cover the lawn in the fewest zones and, among those, the cheapest. It uses the area of the lawn you drew, irregular shapes included.
Mower zones and sprinkler zones are two different things. The first depend on how much area the mower can handle, the second on the water flow available and the type of plants, as we explain in Hydrozones: split your garden to irrigate better. They rarely line up, and they do not need to.
Robot mowers and pop-up sprinklers on the same lawn
The University of Florida extension guide to robotic mowers, published in 2026, lists irrigation heads among the practical problems: they can make the mower unstable, stop it or damage it. The mower crosses them every day, so it pays to sort them out once.
Pop-up heads should sit flush with the soil. A head that sticks up by an inch, often because the ground has settled, needs to be brought back to grade. A flexible swing pipe under the head keeps a knock from reaching the lateral; we explain it in How to bury irrigation pipes: depth and techniques.
Risers must retract. A riser that stays up after a cycle, because of grit or a tired spring, is exactly the kind of low obstacle a mower's sensors miss. At the start of the season run the zones one at a time and check that every head drops back.
Keep the schedules apart. If the sprinklers run at dawn, set the mower to start once the lawn has dried: it will not meet raised risers and will not pack wet clippings under the body.
Mind the depths. The boundary wire sits in the top 20 cm (8 inches) and the irrigation pipe should run at 20 cm or deeper, but swing pipes and fittings under the heads are shallower. Before laying the wire with a cable layer or a spade, mark where the pipes run. If you designed the system, you already have the map; if not, you can rebuild it as described in How to map irrigation zones in your garden.
Put the charging station where no sprinkler sprays straight at it, and the power supply somewhere sheltered.
Frequent cutting, mowing height and water
A robot cuts a little and often and leaves the clippings on the lawn. Researchers at the University of Pisa who compared robots with rotary mowers on tall fescue found equal or better turf quality and lower energy use. The Florida guide adds a limit: most robots are designed for cool-season grasses mowed below about 2.5 inches, while grasses such as St. Augustine need a higher cut.
Height matters for watering. A lawn kept taller has more leaf and deeper roots and copes better between waterings. Before buying, check the maximum cutting height on the spec sheet: the Aspire R4 goes up to 45 mm (1.8 inches), the 430X NERA to 60 mm (2.4 inches), the L60 Elite S+ works between 42 and 48 mm. If you want to hold the lawn at 2 to 2.5 inches in summer, a mower that stops at 1.8 inches will not do it.
In-season maintenance and winter storage
The blades are small and dull quickly. Husqvarna gives 3 to 6 weeks for the main cutting disc blades; the Florida guide recommends replacing them every 6 to 8 weeks in the growing season. Change the screws with them. A ragged cut, with leaf tips turning pale or brown the next day, tells you it is time.
Grass and soil build up under the body, around the cutting disc and on the wheels, more so when the mower works on damp grass. Clean them with a soft brush or a damp cloth. Husqvarna rules out pressure washers for both mower and station and allows a garden hose only on some models, so check your manual.
At the start of the season check the boundary wire. It is easy to cut by accident with a spade, an aerator or an edger; many stations flag a break with a light or an error code, and wire break finders help locate the exact spot.
For winter, Husqvarna recommends new blades and screws, a full battery, the mower switched off and stored indoors in a dry place along with the charging station and power supply. On NERA models only the station baseplate can stay outside. If the station cannot be brought in, it should stay powered with the wire connected. A mower garage shelters the robot from sun and rain during the season; it does not replace winter storage. For other brands, follow the model's manual. The same weeks are the time to winterize the sprinkler system: How to winterize a sprinkler system: drain or blow out, protect the backflow preventer, and restart in spring.
| Task | When | Why |
|---|---|---|
| Replace blades and screws | Every 3-8 weeks in season, per the manual | Dull blades shred the leaf tips |
| Clean body, disc and wheels | Regularly, more often on damp grass | Built-up grass and soil drag on disc and wheels |
| Check that pop-up heads retract | Start of season and after lawn work | A raised riser is a low obstacle |
| Check the boundary wire | Start of season | An accidental cut stops the mower |
| Winter storage | End of season | Full battery, mower and station indoors |
Recommended products
These product links are affiliate links: if you buy on Amazon or AliExpress through them it costs you nothing extra, but it helps us keep SprinklerMap alive as a project and create new useful content.
These products are catalogued in our brand database, with the same description and price range you find on the manufacturer page.
| Model | Type | Description | Radius (m) | Price (€) | Buy |
|---|---|---|---|---|---|
| 🤖 SILENO minimo 250 | Robotic mower | The most compact robot in the range, for lawns up to 250 m². Perimeter wire, 16 cm cutting width, Bluetooth control from the Gardena app. Suited to small, regular gardens. | 250 m² | €380-550 | Amazon |
| 🤖 SILENO city 600 | Robotic mower | 600 m² version of the city series, with Bluetooth and rain sensor. It also works on wet grass and is among the quietest of its class (57 dB). | 600 m² | €490-750 | Amazon |
| Model | Type | Description | Radius (m) | Price (€) | Buy |
|---|---|---|---|---|---|
| 🤖 Automower Aspire R4 | Robotic mower | The entry point to the Automower range, for gardens up to 400 m². Perimeter wire, 17 cm cutting width, collision sensor and Automower Connect app over Bluetooth. | 400 m² | €700-900 | Amazon |
| 🤖 Automower 430X NERA | Robotic mower | Flagship model for gardens up to 3200 m², with GPS-assisted navigation, oversized drive wheels and slopes up to 50% inside the lawn (25% near the boundary). Designed for large properties spread over several areas. | 3200 m² | €2900-3600 | Amazon |
| Model | Type | Description | Radius (m) | Price (€) | Buy |
|---|---|---|---|---|---|
| 🤖 Landroid Vision M800 (WR208E) | Robotic mower | Robot without a perimeter wire: an AI camera tells grass from everything else and defines the edge. Covers up to 800 m² with no digging at all to install. | 800 m² | €1100-1500 | Amazon |
| Model | Type | Description | Radius (m) | Price (€) | Buy |
|---|---|---|---|---|---|
| 🤖 Navimow i105N | Robotic mower | Entry model of the i series, for lawns up to 500 m². RTK positioning, no perimeter wire, 18 cm cutting width and full control from the app. | 500 m² | €700-1050 | Amazon |
| Model | Type | Description | Radius (m) | Price (€) | Buy |
|---|---|---|---|---|---|
| 🤖 L60 Elite S+ | Robotic mower | Robot with no perimeter wire and no installation: you put it on the lawn and it works up to 400 m², recognising the grass with a dedicated sensor. The most immediate answer for small or newly laid gardens. | 400 m² | €800-1300 | Amazon |
Other suggested products
Products not in the brand catalogue: generic material, tools and accessories where the right size matters more than the brand.
| Product | Description | Price (€) | Buy |
|---|---|---|---|
| Universal storage garage for robot lawn mowers | A cover that fits over the charging station and shelters the mower from sun and rain during the season. It does not replace indoor winter storage. | ~€$45-100 | Amazon |
| Universal replacement blade kit for robot mowers | Replacement blades with screws, chosen to match your mower model: in season they are changed every few weeks, at the interval given in the manual. | ~€$12-22 | Amazon |
| Perimeter wire continuity tester | A break finder for boundary wire: it helps locate the spot where the cable has been cut, for example by a spade or an edger. | ~€$18-35 | Amazon |
| Product | Description | Price (€) | Buy |
|---|---|---|---|
| Universal robot mower replacement blades | Multi-packs of blades compatible with the most common models. Check size and hole: compatibility is mechanical, not brand-based. | ~€6-18 | AliExpress |
| Waterproof gel wire connectors | Silicone-gel caps for buried splices: the difference between a zone that always fires and one that dies after the first winter. | ~€5-15 | AliExpress |
Technical note: Model specs quoted here (area, slope, cutting height) come from the manufacturers' official spec pages, checked in November 2026. We have not tested these mowers: we compare declared figures. Product lines change often, so check the current spec sheet of the model you are considering before you buy.